DPE CS5s V1 - Forged 3-Piece

Available Sizes:
Diameter: 19" to 24"

Width: 8" to 13"

About DPE
Dynamic Performance Engineering (DPE), based in Irvine, California prides itself in manufacturing original products. With years of experience and knowledge gained in the aftermarket community, DPE has fused performance, functionality, and design to provide serious auto enthusiasts with the utmost quality in products and customer service.

DPE's custom forged wheel line utilizes the highest quality forged T6-6061 aircraft aluminum components in the manufacturing process to ensure each wheel is lightweight while maintaining stringent structural integrity specifications. R&D followed by Computer Aided Design (CAD) is used to create digital models in order to build prototypes, which are then rigorously tested at independent laboratories to exceed the standards set by the Department of Transportation (DOT).

DPE stresses high quality made in USA products, but more importantly the customer service behind it. With that in mind, dealer selection is key. To the customer, their interaction with DPE is through our dealer network. This is why DPE strives to build long-lasting relationships with each dealer to ensure that they maintain the high level of customer service that DPE dedicates its business to.

Warranty 
DPE Wheels, USA warrants its wheels against defects in workmanship and materials for a period of one (1) year from the date of purchase by the original consumer and/or user (“original purchaser”) under normal and reasonable use. Dynamic Performance Engineering will repair or replace any wheel established to be defective with a wheel of like size, design, and finish if and only if under the same production model run period.

Wheels are made specifically for road use only with road tires. Any use of DPE wheels off road or otherwise releases DPE Wheels from any liability.

The warranty is only for the benefit of and valid for the original purchaser. This warranty does not cover damage due to accident, misuse, abuse or negligence. Claims for damages for appearance defects will not be honored once the wheel has been mounted with a tire. Furthermore, claims will not be honored if the visible existing identification markings have been defaced, altered or removed. The wheel should be mounted with tires, installed by reputable shop that has experience with custom wheels, used and maintained. Failure to follow such instructions will void all warranties.

• This is a performance-designed wheel. The wheel should not be used on vehicles exceeding the load limits, as recommended per wheel.
• The wheel should not be used with a tire exceeding the tire diameter limits, as recommended per wheel. Do not over-inflate the tires. Bias tires should not be inflated to more than 40 p.s.i., and radial tires should not be inflated to more than 35 p.s.i. The tire should be mounted only according to good tire mounting practices using acceptable tire mounting equipment designed for the tire industry. Careless installation techniques may cause damage to wheels for which Dynamic Performance Engineering as the manufacturer does not assume responsibility.
• The wheel should be mounted using only lug nuts, mag nuts, or lug bolts of guaranteed quality and specifications meeting minimum D.O.T. safety requirements. This warranty does not apply if the wheel is modified or altered. In installing the wheel, “spacers” should not be used to resolve clearance problems.
• Wheels should be inspected on a regular basis, at least annually. A wheel must be inspected after any accident to make sure that it has not been damaged and that lug nuts are intact and secure.

Warranty does not cover road hazards such as impacts, potholes, accidents, etc. There is no warranty on the finish due to variable conditions, salt, maintenance, neglect and damage from cleaners.

Except to the extent prohibited by applicable law, the only warranty given by Dynamic Performance Engineering is the warranty specifically set forth herein. There is no other warranty of merchantability or warranty of fitness for a particular purpose and no other express or implied warranty. Any warranty is limited to a duration of one (1) year from the date of original purchase. Replacement, as provided under this warranty, is the exclusive remedy. Dynamic Performance Engineering shall not be liable for any incidental or consequential damage for breach of any warranty including, but not limited to, costs incurred from diagnosis, removal or installation labor, loss of vehicle use, loss of time, or inconvenience.

Some territories do not allow the exclusion or limitation incidental or consequential damages or other limitations on a warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights that vary from territory to territory.

It is important to retain the dated bill of sale/receipt as evidence of purchase and the date of purchase.

To obtain warranty service, you should go back to the distributor where you purchased the wheel with your receipt. It is your responsibility to report any alleged defect within fifteen (15) days after receiving your wheels.

Wheels that are used, second hand, refurbished, disassembled/assembled/repaired by a third party, and/or purchased from an unauthorized DPE Distributor are not covered by DPE nor is DPE liable.

All wheels are to be test fitted prior to mounting tires. If there are fitments issues, contact your distributor so that a representative can review the issue. If mounted prior to test fit and wheels do not fit properly, DPE is not liable and the issue cannot be reviewed.

If purchasing a wheel and tire package from a distributor, DPE is not liable as DPE did not sell you the tires. Please ask your distributor for details